AudioCodes Mediant 2000 User Manual page 362

Parameter
Number Manipulation Tables
Web: Destination Phone Number
Manipulation Table for Tel to IP Calls
EMS: SIP Manipulations > Destination
Telcom to IP
[NumberMapTel2IP]
Web: Destination Phone Number
Manipulation Table for IP to Tel Calls
EMS: EMS: SIP Manipulations >
SIP User's Manual
Description
This ini file table parameter manipulates the destination
number of Tel-to-IP calls. The format of this parameter is
as follows:
[NumberMapTel2Ip]
FORMAT NumberMapTel2Ip_Index =
NumberMapTel2Ip_ DestinationPrefix,
NumberMapTel2Ip_SourcePrefix,
NumberMapTel2Ip_SourceAddress,
NumberMapTel2Ip_NumberType,
NumberMapTel2Ip_NumberPlan,
NumberMapTel2Ip_RemoveFromLeft,
NumberMapTel2Ip_RemoveFromRight,
NumberMapTel2Ip_LeaveFromRight,
NumberMapTel2Ip_Prefix2Add,
NumberMapTel2Ip_Suffix2Add,
NumberMapTel2Ip_IsPresentationRestricted,
NumberMapTel2Ip_SrcTrunkGroupID,
NumberMapTel2Ip_ SrcIPGroupID
[\NumberMapTel2Ip]
For example:
NumberMapTel2Ip 0 =
01,$$,*,0,0,2,$$,$$,971,$$,$$,$$,$$;
NumberMapTel2Ip 1 =
10,10,*,255,255,3,0,5,100,$$,255,$$,$$;
Notes:

This table parameter can include up to 100 indices.

The parameters SourceAddress and
IsPresentationRestricted are not applicable. Set these
to $$.

The parameter RemoveFromLeft, RemoveFromRight,
Prefix2Add, Suffix2Add, LeaveFromRight, NumberType,
and NumberPlan are applied if the called and calling
numbers match the DestinationPrefix and SourcePrefix
conditions.

The manipulation rules are executed in the following
order: RemoveFromLeft, RemoveFromRight,
LeaveFromRight, Prefix2Add, and Suffix2Add.

Parameters can be skipped by using two dollar signs
('$$').

Number Plan and Type can optionally be used in
Remote Party ID (RPID) header by using the
EnableRPIHeader and AddTON2RPI parameters.

To configure manipulation of destination numbers for
Tel-to-IP calls using the Web interface, refer to
'' Configuring the Number Manipulation Tables''
129 ).

For a description on using ini file table parameters, refer
to ''Format of ini File Table Parameters''
This ini file table parameter manipulates the destination
number of IP-to-Tel calls. The format of this parameter is
362
Mediant 2000
;
on page
on page 199 .
Document #: LTRT-68809