AudioCodes Mediant 2000 User Manual page 324

Parameter
Web/EMS: Outgoing Calls
Behavior
[ISDNOutCallsBehavior]
SIP User's Manual
starting from the lowest available B-channel id.

[1024] CHAN ALLOC HIGHEST = CC allocates B-channels
starting from the highest available B-channel id.
Note: When using the ini file to configure the device to support
several ISDNGeneralCCBehavior features, add the individual
feature values. For example, to support both [16] and [32] features,
set ISDNGeneralCCBehavior = 48 (i.e., 16 + 32).
This parameter determines several behaviour options that influence
the behaviour of the ISDN Stack outgoing calls. To select options,
click the arrow button, and then for each required option, select 1 to
enable. The default is 0 (i.e., disable).

[2] USER SENDING COMPLETE =When this bit is set, the
device doesn't automatically generate the information element
Sending-Complete IE in the Setup message. If this bit is not set,
the device generates it automatically in the Setup message
only.

[16] USE MU LAW = When set, the device sends G.711-m-Law
in outgoing voice calls. When disabled, the device sends G.711-
A-Law in outgoing voice calls. (Applicable only to the Korean
variant.)

[128] DIAL WITH KEYPAD = When enabled, the device uses
the Keypad IE to store the called number digits instead of the
CALLED_NB IE. (Only applicable to the KOR variant (Korean
network). Useful for Korean switches that don't accept the
CALLED_NB IE.)

[256] STORE CHAN ID IN SETUP =When this bit is set, the
device forces the sending of a Channel-Id IE in an outgoing
SETUP message even if it's not required by the standard (i.e.,
optional), and no Channel-Id has been specified in the
establishment request. This is useful for improving required
compatibility with switches. On PRI lines, it indicates an unused
channel ID, preferred only.

[572] USE A LAW = When set, the device sends G.711 A-Law
in outgoing voice calls. When disabled, the device sends the
default G.711-Law in outgoing voice calls. Applicable to E10
variant.

[1024] = Numbering plan / type for T1 IP-to-Tel calling numbers
are defined according to the manipulation tables or according to
the RPID header (default). Otherwise, the plan / type for T1
calls are set according to the length of the calling number.

[2048] = When this bit is set, the device accepts any IA5
character in the called_nb and calling_nb strings and sends any
IA5 character in the called_nb, and is not restricted to extended
digits only (i.e., 0-9,*,#).

[16384] DLCI REVERSED OPTION = Behavior bit used in the
IUA interface groups to indicate that the reversed format of the
DLCI field must be used.
Note: When using the ini file to configure the device to support
several ISDNOutCallsBehavior features, add the individual feature
values. For example, to support both [2] and [16] features, set
ISDNOutCallsBehavior = 18 (i.e., 2 + 16).
324
Description
Document #: LTRT-68809
Mediant 2000