AudioCodes Mediant 2000 User Manual page 270

Parameter
[ZeroSDPHandling]
[EnableDelayedOffer]
[AnonymousMode]
EMS: P Asserted User Name
[PAssertedUserName]
EMS: Use URL In Refer To
Header
[UseAORInReferToHeader]
EMS: Use To Header As
Called Num
[IsUseToHeaderAsCalledNu
mber]
EMS: Enable P Time
[EnablePtime]
Web: Enable User-
Information Usage
[EnableUserInfoUsage]
SIP User's Manual
Determines the device's response to an incoming SDP that includes
an IP address of 0.0.0.0 in the SDP message's Connection
Information line (i.e., "c=IN IP4 0.0.0.0").

[0] = Sets the IP address of the outgoing SDP's Connection
Information line to 0.0.0.0 (default).

[1] = Sets the IP address of the outgoing SDP Connection
Information line to the IP address of the device. If the incoming
SDP doesn't contain the "a=inactive" line, the returned SDP
contains the "a=recvonly" line.
Determines whether the device sends the initial INVITE message
with or without an SDP. Sending the first INVITE without SDP is
typically done by clients for obtaining the far-end's full list of
capabilities before sending their own offer. (An alternative method for
obtaining the list of supported capabilities is by using SIP OPTIONS,
which is not supported by every SIP agent.)

[0] = The device sends the initial INVITE message with an SDP
(default).

[1] = The device sends the initial INVITE message without an
SDP.
Determines the source IP address that appears in the SIP From
header.

[0] = No IP address appears in the From header; instead, the
string "Anonymous.invalid" appears (default).

[1] = Device's IP address is entered in the From header.
Defines a 'representative number' (up to 50 characters) that is used
as the User Part of the Request-URI in the P-Asserted-Identity
header of an outgoing INVITE (for Tel-to-IP calls).
The default value is NULL.
Defines the source for the SIP URI set in the Refer-To header of
outgoing REFER messages.

[0] = Use SIP URI from Contact header of the initial call (default).

[1] = Use SIP URI from To/From header of the initial call.
Determines whether the called number is set in the user part of the
To header.

[0] = Sets the destination number to the user part of the Request-
URI for IP-to-Tel calls, and sets the Contact header to the source
number for Tel-to-IP calls (default).

[1] = Sets the destination number to the user part of the To
header for IP-to-Tel calls, and sets the Contact header to the
username parameter for Tel-to-IP calls.
Determines whether the ptime header is included in the SDP.

[0] = Remove the ptime header from SDP.

[1] = Include the ptime header in SDP (default).
Enables or disables usage of the User Information loaded to the
device in the User Information auxiliary file. (For a description on
User Information, refer to ''

[0] Disable = Disabled (default).

[1] Enable = Enabled.
270
Description
Loading Auxiliary Files''
Document #: LTRT-68809
Mediant 2000
on page 174 .)