AudioCodes Mediant 2000 User Manual page 120

3. In the 'Profile Name' field, enter an arbitrary name that enables you to easily identify
the Tel Profile.
4. From the 'Profile Preference' drop-down list, select the priority of the Tel Profile, where
'1' is the lowest priority and '20' is the highest. If both IP and Tel profiles apply to the
same call, the coders and other common parameters (noted by an asterisk in the
description of the parameter TelProfile) of the preferred Profile are applied to that call.
If the Preference of the Tel and IP Profiles is identical, the Tel Profile parameters are
applied.
Note: If the coder lists of both IP and Tel Profiles apply to the same call, only the
coders common to both are used. The order of the coders is determined by the
preference.
5. Configure the Profile's parameters according to your requirements. For detailed
information on each parameter, refer to its description on the page in which it is
configured as an individual parameter.
6. From the 'Coder Group' drop-down list, select the Coder Group (refer to ''Configuring
Coder Groups''
Coders''
7. Repeat steps 2 through 6 to configure additional Tel Profiles (optional).
8. Click the Submit
9. To save the changes to flash memory, refer to ''
3.3.7.5.4 Configuring IP Profiles
The 'IP Profile Settings' page allows you to define up to nine different IP Profiles. You can
later assign IP Profiles to routing rules in the call routing tables:

'Tel to IP Routing' page (refer to ''Configuring the Tel to IP Routing Table''
138 ) or 'Outbound IP Routing Table' for the IP-to-IP application (refer to "Configuring
the Outbound IP Routing Table" on page 142)

'IP to Trunk Group Routing' page (refer to ''Configuring the IP to Trunk Group Routing''
on page
"Configuring the Inbound IP Routing Table" on page 148)
The 'IP Profile Settings' page conveniently groups the different parameters according to
application to which they pertain:

Common Parameters: parameters common to all application types

Gateway Parameters: parameters applicable to gateway functionality
Notes:
SIP User's Manual
on page 117 ) or the device's default coder (refer to ''Configuring
on page 115 ) to which you want to assign the Profile.
button to save your changes.
145 ) or 'Inbound IP Routing Table' for the IP-to-IP application (refer to
•
For a detailed description of each parameter in the 'IP Profile' table, refer
to its corresponding "global" parameter (configured as an individual
parameter).
•
IP Profiles can also be implemented when operating with a Proxy server
(when the parameter AlwaysUseRouteTable is set to 1).
•
You can also configure the IP Profiles using the ini file table parameter
IPProfile (refer to ''SIP Configuration Parameters''
Saving Configuration''
120
Mediant 2000
on page 173
on page
.
on page 260 ).
Document #: LTRT-68809
.