H3C SecPath F1800-A Operation Manual page 76

Operation Manual - Getting Started
H3C SecPath F1800-A Firewall
III. Displaying and Debugging SSH
You can use the display command in any view to view the running state and verify the
configuration of SSH.
You can use the debugging command in user view to debug SSH.
Table 2-89 Displaying and debugging SSH
View public key in key pairs of hosts
and servers.
View RSA public key of the client.
View SSH status and session.
View SSH user information.
Debug SSH.
Debug RSA.
IV. SSH Configuration Example
1) Networking requirements
The configuration terminal (SSH Client) is connected with the SecPath F1800-A
locally, and the client software supporting SSH1.5 is running on the terminal, so as to
ensure the security of data information exchange to the greatest extent.
2) Networking diagram
SSH
Client
Figure 2-22 SSH local configuration networking
3) Configuration procedure
To perform SSH configuration, you need to use the following command first.
[SecPath] rsa local-key-pair create
Note:
If you have configured the local key pair, this step can be skipped over.
Action
1-69
Chapter 2 Basic SecPath F1800-A Configuration
Command
display rsa local-key-pair public
display rsa peer-public-key [ brief |
name key-name ]
display ssh server { status | session }
display ssh
[ user-name ]
debugging ssh server
debugging rsa
SecPath
user-information
vty index | all }
{