Importing Routes Of Other Protocols; Configuring Default Routing Metric; Setting The Rip Preference - H3C SecPath F1800-A Operation Manual

Operation Manual - Network and Routing Protocol
H3C SecPath F1800-A Firewall

4.2.11 Importing Routes of Other Protocols

RIP allows its users to import routes of other routing protocols into the RIP routing
table.
Such routing protocols include:
Direct
Static
OSPF
BGP
Do as follows in RIP view.
Table 4-11 Importing routes of other protocols
Import routes of other protocols.
Cancel the route import of other protocols.

4.2.12 Configuring Default Routing Metric

You can configure default routing metric when you tend to import routes. You can use
the default routing metric if no metric is specified for importing routes.
Do as follows in RIP system.
Table 4-12 Configuring default routing metric
Configure the default routing metric.
Restore the default routing metric.

4.2.13 Setting the RIP Preference

Each kind of routing protocol has its own preference, by which the routing policy will
select the optimal one from the routes of different protocols. The greater the
preference value is, the lower the preference becomes. The preference of RIP can be
set manually.
Do as follows in RIP view.
Action
Action
5-40
Chapter 4 RIP Configuration
Command
import-route protocol [ cost value ]
[ route-policy route-policy-name ]
undo import-route protocol
Command
default cost value
undo default cost