H3C SecPath F1800-A Operation Manual page 20

Operation Manual - Getting Started
H3C SecPath F1800-A Firewall
Figure 2-2 Establishing a new connection
Figure 2-3 Selecting serial interface
Step 3: Select RS-232 serial interface on your computer.
Step 4: Set terminal communication parameters as follows. It is shown in
and Figure
Baud rate is 9600 bit/s.
Data bits is 8.
Stop bits is 1.
Check is none.
2-5:
Chapter 2 Basic SecPath F1800-A Configuration
1-13
Figure 2-4