Edition Feature; Display Feature - H3C SecPath F1800-A Operation Manual

Operation Manual - Getting Started
H3C SecPath F1800-A Firewall

2.3.6 Edition Feature

The command-line interface provides a basic command edition, and supports
multiple-line edition. Each command consists of up to 256 characters.
Table 2-33
Table 2-33 Edition function
Common key
BackSpace
Left arrow(←) or Ctrl+B
Right arrow(→) or Ctrl+F
Up arrow(↑) or Ctrl+P
Down arrow(↓) or Ctrl+N
Tab

2.3.7 Display Feature

If display information exceeds one screen, the system provides pause function for
selection. At this same time, you have three options.
shows the specific edition.
Key
If the edition buffer is not full, the key will be inserted in
the current cursor location, and the cursor is moved to
the right; otherwise, the system sounds out the alarm.
Deletes a character before the cursor location and the
cursor is moved to the left. If the cursor reaches the
beginning of the command, the system sounds out the
alarm.
The cursor is moved with a character to the left. If the
cursor reaches the beginning of the command, the
system sounds out the alarm.
The cursor is moved with a character to the right. If the
cursor reaches the end of the command, the system
sounds out the alarm.
Views last history command.
Views next history command.
Press Tab after an incomplete key word, and the system
will automatically use partial help as below.
If the matched key word is unique, the system will
replace the original entry with the complete key word
and display the command in a new line.
Otherwise,
modification and display the original entry in a new
line.
If the matched key words of parameters in the
command line are not unique, the system will display
the original entry in a new line, and each parameter
will replace the original input one by one until you
stop typing Tab.
Chapter 2 Basic SecPath F1800-A Configuration
Function
the system
1-40
does not make any