Terminal Service; Configuring Terminal Service On The Console Interface; Configuring Terminal Service On The Aux Port - H3C SecPath F1800-A Operation Manual

Operation Manual - Getting Started
H3C SecPath F1800-A Firewall

2.7 Terminal Service

2.7.1 Configuring Terminal Service on the Console Interface

Table 2-73
Table 2-73 Terminal service features on the console interface
Echo mode
Terminal type
Baud rate
Data bits
Parity
Stop bits
Flow control
Binary transmission protocol

2.7.2 Configuring Terminal Service on the AUX Port

Table 2-74
Table 2-74 Terminal service features on the AUX interface
Echo mode
Terminal type
Baud rate
Data bits
Parity
Stop bits
Flow control
You need to set the parameters as described in
parameters as baud rate, data bits, parity and flow control must be consistent with the
configuration on the AUX interface of the SecPath F1800-A.
shows terminal service features on the console interface.
Service type
shows terminal service features on the AUX interface.
Service type
Chapter 2 Basic SecPath F1800-A Configuration
No echo at local end
VT100
9600
8
None
1
None
XModem
No echo at local end
VT100
9600 bit/s (default)
8 (default)
None (default)
1 (default)
None (default)
Table
1-61
Value
Value
2-74. Note that such