Entering User Interface View - H3C SecPath F1800-A Operation Manual

Operation Manual - Getting Started
H3C SecPath F1800-A Firewall
User interface of the system is classified into three types: the Console interface, the
AUX interface and the VTY interface, which are arranged in a specific order.
Of these, there is only one Console interface and one AUX port, and there are
possibly multiple VTY user interfaces that are arranged in a specific order. Start
number of absolute numbering mode is 0. You can use absolute numbering mode to
uniquely specify a user interface or a group of user interfaces.
For example, there are console, AUX and five VTY user interfaces in the system, and
the absolute numbering in the system is described in
Table 2-55 Absolute numbering mode
ui0
ui1
ui2
ui3
2) Relative numbering mode
Relative numbering is formed with: user interface type + number (an internal number
of the user interface type).
Relative numbering mode can uniquely specify one or a group of user interfaces with
the same type. It complies with the following rules:
Console numbering: console 0.
AUX numbering: aux 0.
VTY numbering: The first user interface is VTY 0, and the second one is VTY 1,
and so on.
User interface configuration includes:

Entering user interface view

Configuring asynchronous interface attributes
Configuring terminal attributes
Configuring Modem attributes
Configuring redirection
Configuring call-in or call-out restriction on VTY user interface
2.6.2 Entering User Interface View
Enter a command in system view to enter user interface view. You can enter a single
user interface view to configure the user interface, or enter multiple user interface
views to configure multiple user interfaces.
Absolute numbering
Chapter 2 Basic SecPath F1800-A Configuration
Table
Console
AUX
First VTY user interface
Second VTY user interface
1-54
2-55.
User interface