Configuring Static Route; Configuring A Static Route; Configuring A Default Route; Displaying And Debugging The Routing Table - H3C SecPath F1800-A Operation Manual

Operation Manual - Network and Routing Protocol
H3C SecPath F1800-A Firewall

3.2 Configuring Static Route

Static route configuration includes:

Configuring a static route

Configuring a default route

3.2.1 Configuring a Static Route
Do as follows in system view.
Table 3-1 Configuring a static route
Action
Add a static route.
Delete
route.
3.2.2 Configuring a Default Route
Do as follows in system view.
Table 3-2 Configuring a default route
Configure a default route.
Delete the default route.

3.3 Displaying and Debugging the Routing Table

You can use the display command in any view to view the running state and verify the
configuration of the routing table.
Table 3-3 Displaying and debugging the routing table
View the routing table in brief.
View the routing table in detail.
ip route-static ip-address { mask | mask-length }
{ interface-type interface-number | gateway-address }
[ preference value ] [ reject | blackhole ]
undo ip route-static ip-address { mask | mask-length }
the static
[ interface-type interface-number | gateway-address ]
[ preference value ]
Action
ip route-static 0.0.0.0 { 0.0.0.0 | 0 } { interface-type
interface-number | gateway-address } [ preference
value ] [ reject | blackhole ]
undo ip route-static 0.0.0.0 { 0.0.0.0 | 0 }
[
gateway-address ]
Action
Chapter 3 Static Route Configuration
Command
Command
interface-type
display ip routing-table
display ip routing-table verbose
5-30
interface-number
Command
|