H3C SecPath F1800-A Operation Manual page 194

H3c secpath f1800-a firewall

Hide thumbs Also See for H3C SecPath F1800-A:

Table of Contents

Operation Manual - Link Layer Protocol

H3C SecPath F1800-A Firewall

# Set the encapsulation type of Ethernet 3/0/0.2 and the related VLAN ID.

[SecPath-Ethernet3/0/0.2] vlan-type dot1q 20

# Create an Ethernet sub-interface Ethernet 4/0/0.1 and enter its view.

# Assign the IP address to Ethernet 4/0/0.1.

[SecPath-Ethernet4/0/0.1] ip address 3.0.0.1 255.0.0.0

# Set the encapsulation of Ethernet 4/0/0.1 and the related VLAN ID.

[SecPath-Ethernet4/0/0.1] vlan-type dot1q 10

# Create an Ethernet sub-interface Ethernet 4/0/0.2 and enter its view.

# Assign the IP address to Ethernet 4/0/0.2.

# Set the encapsulation of Ethernet 4/0/0.2 and the related VLAN ID.

[SecPath-Ethernet4/0/0.2] vlan-type dot1q 20

] interface ethernet 4/0/0.1

] interface ethernet 4/0/0.2

-Ethernet4/0/0.2] ip address 4.0.0.1 255.0.0.0

Chapter 1 VLAN Configuration

Chapters

Table of Contents

Do you have a question about the H3C SecPath F1800-A and is the answer not in the manual?