Configuring An Hwtacacs Server Template To The Domain; Configuring Address Relative Attributes To The Domain - H3C SecPath F1800-A Operation Manual

Operation Manual - Security Defence
H3C SecPath F1800-A Firewall
Table 5-33 Configuring a RADIUS server template to the domain
Configure
template to the current domain.
Delete
configured to the current domain.
Make sure the RADIUS server template to be deleted exists.

5.5.4 Configuring an HWTACACS Server Template to the Domain

Do as follows in domain view.
Table 5-34 Configuring an HWTACACS server template to the domain
Configure
template to the current domain.
Delete the configuration.
Make sure the HWTACACS server template to be deleted exists.

5.5.5 Configuring Address Relative Attributes to the Domain

The domain can assign IP addresses to access users or advertise the IP address of
the DNS or NBNS server to the access users.
I. Configuring an Address Pool in the Domain
Usually, a PPP user needs to obtain an IP address from the BAS while logging in.
In the case that the BAS authenticates the user, it will allocate an IP address to the
user from the address pool in the domain where the user belongs.
Do as follows in domain view.
Table 5-35 Configuring an address pool in the domain
Configure an address pool in the
domain.
Action
a RADIUS server
the server template
Action
an HWTACACS
Action
radius-server template-name
undo radius-server
server
hwtacacs-server template-name
undo hwtacacs-server
ip pool
[ last-address ]
6-109
Chapter 5 AAA
Command
Command
Command
pool-number first-address