H3C SecPath F1800-A Operation Manual page 39

Operation Manual - Getting Started
H3C SecPath F1800-A Firewall
Entry command
Prompt after entry
Exit command
Prompt after exit
Table 2-15 HWTACACS view
Function
Entry command
Prompt after entry
Exit command
Prompt after Exit
Table 2-16 AAA scheme view
Function
Entry command
Prompt after entry
Exit command
Prompt after exit
Table 2-17 Recording scheme view
Function
Item
[SecPath] radius-server template test
test in the command is the name of RADIUS server
template.
[SecPath-radius-test]
[SecPath-radius-test] quit
[SecPath]
Item
Enters HWTACACS view to set authentication and
authorization parameters of HWTACACS.
[SecPath] hwtacacs-server template test
test in the command is the name of HWTACACS server
template.
[SecPath-hwtacacs-test]
[SecPath-hwtacacs-test] quit
[SecPath]
Item
Enters AAA scheme view and sets authentication and
authorization mode.
[SecPath-aaa] authentication-scheme test
[SecPath-aaa] authorization-scheme test
test in the commands refers to the specified authentication
and authorization mode.
[SecPath-aaa-authen-myscheme]
[SecPath-aaa-authen-myscheme] quit
[SecPath-aaa]
Item
Enters
HWTACACS server template.
Chapter 2 Basic SecPath F1800-A Configuration
Description
Description
Description
Description
recording scheme
1-32
view to configure the