H3C SecPath F1800-A Operation Manual page 34

Operation Manual - Getting Started
H3C SecPath F1800-A Firewall
Login
Figure 2-14 Relationship between system maintenance views
The following tables show the relative information about various views.
Table 2-2 User view
Function
Entry command
Prompt after entry
Exit command
Prompt after exit
Table 2-3 System view
Function
Entry command
Prompt after entry
Exit command
Prompt after exit
Table 2-4 User interface view
Function
Entry command
Prompt after entry
User view
System view
Item
Views simple running state and statistics of the SecPath
F1800-A.
Directly enters after connection is set up.
<SecPath>
<SecPath> quit
Views after disconnection.
Item
Sets system parameters of the SecPath F1800-A, and you
can enter other function views from this view.
<SecPath> system-view
[SecPath]
[SecPath] quit
<SecPath>
Item
Sets parameters of various user interfaces and manage
relative interfaces.
[SecPath] user-interface console 0
In the above example, the parameter console can be
replaced with the parameters aux or vty.
[SecPath-ui-console0]
Chapter 2 Basic SecPath F1800-A Configuration
FTP Client view
User interface view
RSA public key view
Description
Description
Description
1-27
RSA public key edition view