Resetting Bgp Connection; Configuring Bgp Route Refresh - H3C SecPath F1800-A Operation Manual

Operation Manual - Network and Routing Protocol
H3C SecPath F1800-A Firewall
Table 6-40 Setting AS confederation attribute compatible with nonstandard router
Set AS
compatible with nonstandard router.
Cancel AS confederation attribute
compatible with nonstandard router.

6.2.20 Resetting BGP Connection

After changing BGP policies or protocols, you must reset the current BGP connection
so as to make the new configuration take effect.
Do as follows in user view.
Table 6-41 Resetting BGP connection
Reset BGP connection between
specified peers.
Reset all BGP connections.
Reset
between all peers in a specified
peer group.

6.2.21 Configuring BGP Route Refresh

When the BGP route policy changes, the relevant routing information should be
calculated again. So the routers in support of BGP route refresh can refresh route by
re-calculating the routing information.
Do as follows in user view.
Table 6-42 Performing BGP route refresh
Refresh
routes.
Refresh
sub-address family routes.
Refresh
instance routes.
Action
confederation
Action
the BGP connections
Action
common BGP
multicast
specified VPN
Chapter 6 BGP/MBGP Configuration
attribute
confederation nonstandard
undo confederation nonstandard
reset bgp peer-address
reset bgp all
reset bgp group group-name
Command
refresh bgp { all | peer-address | group
group-name } { import | export }
refresh bgp { all | peer-address | group
group-name } multicast { import | export }
refresh bgp { all | peer-address | group
group-name } vpn-instance vpn-instance-name
{ import | export }
5-107
Command
Command