Configuring System Clock; Configuring Command Privilege Level - H3C SecPath F1800-A Operation Manual

Operation Manual - Getting Started
H3C SecPath F1800-A Firewall

2.4.4 Configuring System Clock

An accurate system clock is needed to ensure the coordinated work of other devices.
The SecPath F1800-A supports time zone and summer time.
Do as follows in user view.
Table 2-42 Configuring system clock
Set UTC standard time.
Set the local time zone.
Delete the time zone.
Apply summer time.
Delete the summer time.

2.4.5 Configuring Command Privilege Level

All commands are classified into four privilege levels:
Visit
Monitoring
Configuration
Management
Their identifiers are 0 to 3 respectively.
The system administrator can specify privilege level and view for a command as
required.
Do as follows in system view.
Table 2-43 Setting command privilege level
Set privilege level for a command.
Restore the default privilege level of
the command.
Action
Action
1-45
Chapter 2 Basic SecPath F1800-A Configuration
Command
clock datetime HH:MM:SS YYYY/MM/DD
clock timezone time-zone-name { add |
minus } offconfigure
undo clock timezone
clock
summer-time-zone-name
repeating } start-time start-date end-time
end-date add-time
undo clock summer-time
Command
command-privilege level level view view
command-key
undo command-privilege view
command-key
summer-time
{ |
one-off
view