Defining Policy Routing Behavior - H3C SecPath F1800-A Operation Manual

Operation Manual - Network and Routing Protocol
H3C SecPath F1800-A Firewall
Table 7-1 Defining a class and entering class view
Define a class and enter class
view.
Delete the class.
II. Defining Traffic Classification Rules
Do as follows in class view to define classification rules.
Table 7-2 Defining or deleting ACL match rules
Define ACL match rules.
Delete ACL match rules.

7.2.3 Defining Policy Routing Behavior

I. Defing a Traffic Behavior and Entering Behavior View
Do as follows in system view.
Table 7-3 Defining a traffic behavior and entering behavior view
Define a traffic behavior and enter
behavior view.
Delete the traffic behavior.
II. Re-designating a Next Hop
In the traffic behavior, you can use the remark ip-nexthop command to define policy
routing action.
Do as follows in traffic behavior view.
Action
Action
Action
5-127
Chapter 7 Policy Routing Configuration
Command
traffic classifier tcl-name
undo traffic classifier tcl-name
Command
if-match acl acl-number
undo if-match acl acl-number
Command
traffic behavior behavior-name
undo traffic behavior behavior-name