H3C SecPath F1800-A Operation Manual page 596

Operation Manual - Reliability
H3C SecPath F1800-A Firewall
[SecPath-Ethernet1/0/0] vrrp vrid 4 virtual-ip 10.100.10.101
[SecPath-Ethernet1/0/0] quit
# Configure VRRP backup groups 2 and 5 on Ethernet 2/0/0; assign a virtual IP
address to each backup group.
[SecPath] interface ethernet 2/0/0
[SecPath-Ethernet2/0/0] vrrp vrid 2 virtual-ip 10.100.20.1
[SecPath-Ethernet2/0/0] vrrp vrid 5 virtual-ip 10.100.20.101
[SecPath-Ethernet2/0/0] quit
# Configure VRRP backup groups 3 and 6 on Ethernet 3/0/0; assign a virtual IP
address to each backup group.
[SecPath] interface ethernet 3/0/0
[SecPath-Ethernet3/0/0] vrrp vrid 3 virtual-ip 202.38.10.1
[SecPath-Ethernet3/0/0] vrrp vrid 6 virtual-ip 202.38.10.101
[SecPath-Ethernet3/0/0] quit
# Create VRRP management group1; set the priority of the VRRP management group
to 105; enable preemption of the group; add backup groups 1, 2 and 3 to VRRP
management group1; specify Ethernet 1/0/0 and Ethernet 2/0/0 as ends of two data
channels. Ethernet 2/0/0 does not affect the system VRRP state and you need to
enable the VRRP management group.
[SecPath] vrrp group 1
[SecPath-vrrpgroup-1] vrrp-group priority 105
[SecPath-vrrpgroup-1] vrrp-group preempt
[SecPath-vrrpgroup-1] add interface Ethernet 1/0/0 vrrp vrid 1 data
[SecPath-vrrpgroup-1]
transfer-only
[SecPath-vrrpgroup-1] add interface Ethernet 3/0/0 vrrp vrid 3
[SecPath-vrrpgroup-1] vrrp-group enable
# Create VRRP management group2; apply the default priority to the management
group; enable preemption of the group; add backup groups 4, 5 and 6 to VRRP
management group2; specify Ethernet 1/0/0 and Ethernet 2/0/0 as ends of two data
channels. Ethernet 2/0/0 does not affect the system VRRP state and you need to
enable the VRRP management group.
[SecPath] vrrp group 2
[SecPath-vrrpgroup-2] vrrp-group enable
[SecPath-vrrpgroup-2] vrrp-group preempt
[SecPath-vrrpgroup-2] add interface Ethernet 1/0/0 vrrp vrid 4 data
[SecPath-vrrpgroup-2]
transfer-only
[SecPath-vrrpgroup-2] add interface Ethernet 3/0/0 vrrp vrid 6
[SecPath-vrrpgroup-1] vrrp-group enable
add interface Ethernet
add interface Ethernet
8-33
Chapter 1 Route Redundancy Backup
2/0/0 vrrp vrid
2/0/0 vrrp vrid
2 data
5 data