Enabling Or Disabling The External Ids; Displaying And Debugging Ids Cooperation - H3C SecPath F1800-A Operation Manual

Operation Manual - Security Defence
H3C SecPath F1800-A Firewall
Remove the packet authentication mode
between the firewall and the external IDS
server.

4.2.4 Enabling or Disabling the External IDS

Do as follows in system view.
Table 4-4 Enabling or disabling the external IDS
Enable the external IDS.
Disable the external IDS.
Note:
You can enable the external IDS through the firewall ids enable command only after
all the configurations of the IDS cooperation are completed. Otherwise, the external
IDS is invalid.

4.3 Displaying and Debugging IDS Cooperation

You can use the display command in any view to view the running state and verify the
configuration of IDS cooperation.
You can use the debugging command in user view to debug IDS cooperation.
Table 4-5 Displaying and debugging IDS cooperation
View the configuration of the external IDS.
Debug the external IDS.
Action
Action
Action
6-84
undo firewall ids authentication
Command
firewall ids enable
undo firewall ids enable
display firewall ids
debugging firewall ids
Chapter 4 IDS Cooperation
Command
Command