Displaying And Debugging Rip - H3C SecPath F1800-A Operation Manual

Operation Manual - Network and Routing Protocol
H3C SecPath F1800-A Firewall
Cancel the filtering of the routing
information imported from the specified
address.
Filter the imported global routing
information.
Cancel the filtering of the imported
global routing information.
II. Configuring RIP to Filter the Exported Routes
Table 4-17 Configuring RIP to filter the imported routes
Filter the exported routing
information.
Cancel the filtering of the
exported
information.

4.3 Displaying and Debugging RIP

You can use the display command in any view to view the running state and verify the
configuration of RIP.
You can use the debugging command in user view to debug RIP.
Table 4-18 Displaying and debugging RIP
View the current RIP running state and
configuration information.
Debug RIP packet.
Debug RIP packet receiving.
Debug RIP packet sending.
Action
Action
filter-policy { acl-number | ip-prefix ip-prefix-name }
export [ routing-protocol ]
undo filter-policy { acl-number
routing
ip-prefix-name } export [ routing-protocol ]
Action
undo filter-policy
ip-prefix-name import
filter-policy { acl-number | ip-prefix
ip-prefix-name } import
undo filter-policy { acl-number
ip-prefix ip-prefix-name } import
Command
display rip
debugging rip packets
debugging rip receive
debugging rip send
5-43
Chapter 4 RIP Configuration
Command
gateway
| ip-prefix
Command
|