Connecting Cables To The Expansion Card; Connecting A Battery Backup Unit To The Expansion Card - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

Figure 112: Installing the expansion card (B)
Ê Clip on the PCI slot bracket clamp (1).
Ê Fold down the locking handle on the PCI slot bracket clamp until it locks in
place (2).
Ê If applicable, install SFP+ transceiver modules into the new expansion card,
as described in section
9.2.1.5

Connecting cables to the expansion card

Ê If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
overview" on page
9.2.1.6

Connecting a battery backup unit to the expansion card

Ê If applicable, connect a BBU to the expansion card as described in section
"Installing a BBU" on page
TX140 S1
"Installing SFP+ transceiver modules" on page
490.
245.
Upgrade and Maintenance Manual
Expansion cards and backup units
284.
"Cabling
231