Ê Open the side / top cover as described in section
on page 67
(rack server) or
server).
Ê Remove the fan module as described in section
on page
208.
10.3.3 Removing a memory module
Ê Identify the desired memory slot according to the mounting order described
in section
"Memory sequence" on page
V
CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Operation modes" on page
Figure 166: Removing memory modules (A)
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory module connector.
TX140 S1
"Removing the side cover" on page 71
295.
Upgrade and Maintenance Manual
"Removing the top cover"
"Removing the fan module"
294.
Main memory
(tower
301