Configuration Tables; Hard Disk Drives / Solid State Drives Mounting Order; Memory Board Configuration Table; Expansion Card Configuration Table - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

Appendix
Pos. Component
7 Battery backup unit
SAS / SATA HDD / SSD
8
backplane
9 HDD / SSD drive bay
10 Front panel module bay
11 Accessible drive bay
12 System board D3049
13 Memory modules
Standard power supply
14
unit
17.2

Configuration tables

17.2.1 Hard disk drives / solid state drives mounting order

Please refer to chapter

17.2.2 Memory board configuration table

Please refer to chapter

17.2.3 Expansion card configuration table

Please refer to chapter
574
Reference
"Replacing a BBU" on page 266
– "Replacing the 2.5-inch HDD
SAS / SATA backplane" on page 185
– "Replacing the 3.5-inch HDD
SAS / SATA backplane" on page 194
"Hard disk drives / solid state drives" on
page 159
"Replacing expansion cards" on page 238
"Replacing the fan module" on page 207
"Replacing the system board" on
page 451
"Replacing memory modules" on
page 303
"Replacing the standard power supply unit"
on page 124
"Hard disk drives / solid state drives" on page
"Main memory" on page
"Expansion cards and backup units" on page
Upgrade and Maintenance Manual
293.
159.
223.
TX140 S1