Concluding Steps - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

Figure 341: Connecting the front LAN board to the system board
Ê Connect the front LAN board to system board connector FRONT LAN.
I
Ensure that the front LAN board holder snaps in place.

16.2.5 Concluding steps

Perform the following procedures to complete the task:
Ê Close the front cover and reinstall the ID card as described in section
"Mounting the rack front cover" on page 77
front cover" on page 82
Ê Close the side / top cover as described in section
on page 80 (rack server) or
server).
TX140 S1
(tower server).
"Mounting the side cover" on page 85
Upgrade and Maintenance Manual
(rack server) or "Mounting the
"Mounting the top cover"
Cabling
(tower
509