Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual page 153

Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired server as described in section
server" on page
Ê Shut down the server as described in section
page 61.
Ê Remove all AC power cords from the cable ties and disconnect them from
the system as described in section
Ê When working on a rack-mounted server, extend it out of the rack as
described in section
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
Ê Open the side / top cover as described in section
on page 67 (rack server) or
server).
Ê Remove the fan module as described in section
on page 208.
TX140 S1
61.
54.
"Extending the server out of the rack" on page
"Removing the side cover" on page 71
Upgrade and Maintenance Manual
"Locating the defective
"Shutting down the server" on
"Disconnecting power cords" on page
66.
"Removing the top cover"
"Removing the fan module"
Power supply
"Opening the rack
63.
65.
(tower
153