Re-Installing The Front Panel Module - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

Front panel and external connectors
Ê Attach EasyClick rails on either side of the front panel module, each with two
M3 x 4.5 mm screws.
I
Use the holes in the bottom row of the perforated rail as shown.

13.2.2.5 Re-installing the front panel module

Figure 259: Installing the front panel module
Ê Insert the front panel module into its installation bay and carefully push in
until it locks in place.
406 Upgrade and Maintenance Manual
TX140 S1