Cabling - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

16

Cabling

This chapter provides information on how to connect, disconnect and route
cables.
Safety notes
V
CAUTION!
Always hold cables by their connectors when disconnecting them.
●
Never pull on the cable to disconnect cables.
Ensure that none of the cables are scraped, strained or otherwise
●
damaged while replacing system components.
Immediately replace cables with damaged shielding.
●
Always use shielded network cables.
●
In this chapter
"Cabling overview" on page 490
●
"Replacing the front panel cable" on page 500
●
"Replacing the power cable" on page 510
●
"Replacing the ODD SATA cable" on page 523
●
"Replacing SAS / SATA backplane cables" on page 529
●
"Replacing the backup drive USB cable" on page 539
●
"Replacing BBU cables" on page 546
●
"Replacing the front LAN cable" on page 545
●
"Replacing the intrusion switch cable" on page 560
●
TX140 S1
Upgrade and Maintenance Manual 489