Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual page 445

Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "D3049 BIOS Setup Utility for PRIMERGY
TX140 S1 / TX120 S3 Reference Manual", available from the
ServerView Suite DVD 2 supplied with your PRIMERGY server or
online at
http://jp.fujitsu.com/platform/server/primergy/manual/
market).
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired server as described in section
server" on page
Ê Shut down the server as described in section
page 61.
Ê Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
Ê When working on a rack-mounted server, extend it out of the rack as
described in section
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
Ê Open the side / top cover as described in section
on page 67 (rack server) or
server).
TX140 S1
http://manuals.ts.fujitsu.com
61.
54.
"Disconnecting power cords" on page
"Extending the server out of the rack" on page
"Removing the side cover" on page 71
Upgrade and Maintenance Manual
System board and components
(EMEA market) or
(Japanese
"Opening the rack
"Locating the defective
"Shutting down the server" on
66.
"Removing the top cover"
63.
65.
(tower
445