5.1.6
Switching on the ID indicator
When working in a datacenter environment, switch on the ID indicator on the
front and rear connector panels of the server for easy identification.
I
For further information, refer to section
page 54
or to the "ServerView Suite Local Service Concept (LSC)"
manual available from the ServerView Suite DVD 2 supplied with your
PRIMERGY server or online at
market) or
market).
Using the ID button on the front panel
Ê Press the ID button on the front panel to switch on the system identification
LEDs.
I
For further information, refer to section
indicators" on page
Using ServerView Operations Manager
Ê In ServerView Operations Manager Single System View and press the Locate
button in the title bar to switch on the ID indicators.
TX140 S1
http://jp.fujitsu.com/platform/server/primergy/manual/
584.
Upgrade and Maintenance Manual
Basic software procedures
"Locating the defective server" on
http://manuals.ts.fujitsu.com
"Front panel controls and
(EMEA
(Japanese
99