Converting a tower server to a rack server
15.5.2 Re-installing the front panel and accessible drives
Figure 310: Accessible drives mounting order (rack server)
Sequence Accessible drive
1
Optical disk drive
2
Backup drive LTOx
3
Backup drive DAT
4
Backup drive RDX
Table 10: Accessible drive mounting sequence
Ê Rotate the front panel module by 90 degrees and reinstall it into the upper
bay as described in section
Ê Reinstall all accessible drive into their original bays (rotated by 90 degrees)
according to the mounting sequence in
described in sections
and
"Installing a backup drive" on page
Ê Reinstall all accessible drive dummy modules as described in section
"Installing accessible drive dummy modules" on page
480
Bay
Bay 1
Bay 2
Bay 3 if bay 2 is occupied
Bay 2
Bay 3 if bay 2 is occupied
Bay 2
Bay 3 if bay 2 is occupied
"Installing the front panel module" on page
"Installing an optical disk drive (ODD)" on page 332
Upgrade and Maintenance Manual
5.25 inch x 1.6 inch
table 10 on page
344.
358.
Max. no.
1
1
1
1
378.
480. Proceed as
TX140 S1