Opening The Rack Door; Shutting Down The Server - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

I
In addition to local diagnostic indicators, CSS or Global Error LEDs
indicate, if the defective component is a customer replaceable unit or if a
service technician needs to be dispatched to replace the part (see
section "Determining the error class" on page
If the system has been powered off to replace a non hot-plug unit, a
system of PRIMERGY diagnostics indicators guides you to the faulty
component.
4.2

Opening the rack door

I
The following description only applies to the PRIMECENTER rack. For
further instructions on opening or closing the 19-inch rack, please refer
to the "19-inch Rack for PRIMERGY and RM systems" assembly guide,
available from the ServerView Suite DVD 2 supplied with your
PRIMERGY server or online at
market) or
market).
The PRIMECENTER rack is equipped with a split front door. The left-hand door
contains an interlocking system that can be locked and opened with a key.
Optionally, a revolving door knob can be mounted for key-less locking. To
unlock and open the rack, proceed as follows:
Ê Insert and turn the key by counter-clockwise by 180 degrees.
If applicable, turn the door knob counter-clockwise by 180 degrees.
Ê Open the left-hand door first, then the right-hand door.
I
For further information, refer to the "PRIMECENTER Rack System"
assembly guide, available from the ServerView Suite DVD 2 supplied
with your PRIMERGY server or online at
(EMEA market) or
(Japanese market).
4.3

Shutting down the server

V
CAUTION!
For further safety information, please refer to chapter
information" on page
TX140 S1
http://jp.fujitsu.com/platform/server/primergy/manual/
http://jp.fujitsu.com/platform/server/primergy/manual/
41.
Upgrade and Maintenance Manual
Basic hardware procedures
55).
http://manuals.ts.fujitsu.com
http://manuals.ts.fujitsu.com
(EMEA
(Japanese
"Important
61