Main Memory - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

10

Main memory

This section provides information on how to install, remove or replace memory
modules.
Safety notes
V
CAUTION!
Do not install unsupported third party memory modules. For further
●
information on supported memory modules, refer to section
procedure" on page
Memory modules remain hot after shutdown. Wait for components to
●
cool down before installing or removing memory modules to prevent
burns.
Do not insert and remove memory modules repeatedly. Doing so may
●
cause failures.
Pressing out the securing clips on the memory module connector will
●
eject the installed memory module. To prevent damage and injuries
eject memory modules carefully without applying excessive force.
For further information, please refer to chapter
●
information" on page
In this chapter
"Memory sequence" on page 294
●
"Operation modes" on page 295
●
"Installing memory modules" on page 296
●
"Removing memory modules" on page 300
●
"Replacing memory modules" on page 303
●
TX140 S1
294.
41.
Upgrade and Maintenance Manual
"Basic
"Important
293