Concluding Steps - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

13.2.1.8 Concluding steps

Ê Reinstall the fan module as described in section
on page 209.
Ê Close the front cover and reinstall the ID card as described in section
"Mounting the rack front cover" on page 77
front cover" on page 82
Ê Close the side / top cover as described in section
on page 80 (rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
page 90.
Ê If applicable, close the rack door as described in section
door" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
TX140 S1
(tower server).
"Mounting the side cover" on page 85
92.
Upgrade and Maintenance Manual
Front panel and external connectors
"Installing the fan module"
(rack server) or
87.
"Connecting the server to the mains" on
116.
"Mounting the
"Mounting the top cover"
(tower
89.
"Closing the rack
"Enabling
397