Installing The Power Supply Module - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

6.3.1.4

Installing the power supply module

Figure 57: Installing the power supply module
Ê Push the PSU module into its slot (1) as far as it will go until the locking latch
snaps in place (2).
V
CAUTION!
Ensure that the PSU module properly engages in its slot and is locked
in position in order to prevent it from sliding out of the chassis during
transportation.
Ê If applicable, fold down the handle on the PSU module.
TX140 S1
Upgrade and Maintenance Manual
Power supply
147