Tools You Need At Hand - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

2.3

Tools you need at hand

When preparing the maintenance task, ensure that all required tools are
available according to the overview below. You will find a list of required tools at
the beginning of each procedure.
Screw driver /
Bit insert
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
Phillips
PH2 / (+) No. 2
hexagonal cross
SW5 / PZ2
Phillips
PH0 / (+) No. 0
Phillips
PH0 / (+) No. 0
Table 3: List of required tools and used screws
TX140 S1
Screw
Upgrade and Maintenance Manual
Before you start
Usage Type
Backup
M3 x 4.5 mm
drives,
(silver)
optical disk
drives,
C26192-Y10-C67
chassis
M3 x 6 mm
System
(silver)
board
C26192-Y10-C68
UNC
Backup
6-32 x 4.76 mm
drives with
(black)
UNC thread
C26192-Y10-C75
M3 x 3.5 mm
Wafer head screw
2.5-inch
(silver)
HDDs / SSDs
C26192-Y10-
C102
Slimline ODD M2 x 2.5 mm
(silver)
C26192-Y10-C62
35