Trusted Platform Module (Tpm); Installing The Tpm Board; Required Tools; Preliminary Steps - Fujitsu PRIMERGY TX140 S1 Upgrade And Maintenance Manual

14.3

Trusted Platform Module (TPM)

This section provides information on how to install, remove or replace the
Trusted Platform Module (TPM).

14.3.1 Installing the TPM board

Field Replaceable Units (FRU)
Average hardware task duration: 5 minutes
Average software task duration: 5 minutes

14.3.1.1 Required tools

Preliminary and concluding steps:
●
– Phillips PH2 / (+) No. 2 screw driver
Installing the TPM:
●
– Bit screw driver
– TPM bit insert
( )
* For the Japanese market:
– TPM module fixing tool (S26361-F3552-L909)

14.3.1.2 Preliminary steps

Before installing the TPM board, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired server as described in section
server" on page
TX140 S1
( )
*
93.
61.
54.
Upgrade and Maintenance Manual
System board and components
"Disabling BitLocker
"Opening the rack
"Locating the defective
437