4.6
Closing the server
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY TX140 S1 server must not run while the top / side cover
is removed.
For further safety information, please refer to chapter
●
information" on page
4.6.1
Rack model
4.6.1.1
Mounting the rack front cover
Figure 23: Installing the rack front cover (A)
Ê Hook the three tabs on the rack front bezel into the notches in the chassis.
TX140 S1
41.
Upgrade and Maintenance Manual
Basic hardware procedures
"Important
77