Avaya S8700 Maintenance Manual page 68

Avaya s8700 media server for ip connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance Object Repair Procedure

Error Log Entries and Test to Clear Values

Table 8-327. MET Line Error Log Entries

Associated Test

busyout port

Hybrid Line Station

Audits test (#61)

Port Diagnostic test

Hybrid and Conf.

Circuits test (#57)

TDM NPE Crosstalk

Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate

test's description, and follow its recommended procedures.

Major or Minor alarms MO may be downgraded to Warning alarms based on the values used in the set options

a. The data link between the port and the terminal is not operational (i.e., the

port circuitry has detected an off-board problem). Verify that the MET set is

connected and that the EPF (Electronic Power Feed) test passes. If data

transmission problems are experienced, check for defective wiring or a

defective voice terminal, or move terminal electrically closer to the switch

(i.e., reduce the length of the wiring between the terminal and the switch).

If the problem persists, replace the circuit pack. Once the problem is

resolved, the system retires the alarm after a predetermined time delay.

Issue 1 May 2002

Test to Clear Value

test port UUCSSpp sh r 1

release port UUCSSpp

test port UUCSSpp sh

test port UUCSSpp sh r 4

test port UUCSSpp l r 3

Chapters

Table of Contents