Avaya S8700 Maintenance Manual page 48

Maintenance Object Repair Procedure
Error Log Entries and Test to Clear Values
Table 8-314. DS1 Interface Circuit Pack Maintenance Error Log Entries
Error Aux
Type Data Associated Test
1
0 0 Any
1(a) 0 Circuit pack removed or
SAKI test (#53)
18(b) 0 busyout board UUCSS
23(c) 0
125(d) None None
257(e) 6553 Control Channel Loop
5 test (#52)
1538(f) Any Hyper activity
1793 Any NIC Loss Of Signal
2049(g) Any NT PC Failure
2305 Any IP Address Inconsistency
2561 Any Ping Error
3841(h) 4358
3999(i) Any None
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
2. If ports are assigned to the circuit pack, then a minor alarm is raised. If no ports are assigned to the circuit pack,
then a warning alarm is raised. The alarm is raised after the circuit pack has been missing for a period of 15
minutes. Warning alarms are also raised against any ports administered on the circuit pack.
3. Minor alarms on this MO may be downgraded to warning alarms based on values set in the set options
command.
8-744 Issue 1 May 2002
On/Off
Alarm Level Board
Any Any
MINOR ON
2
WARNING
WARNING OFF
WARNING OFF
MINOR ON
3
WARNING
MINOR ON
MINOR ON
3
WARNING
MINOR
3
WARNING
MINOR
3
WARNING
MINOR
3
WARNING
Log Only
Continued on next page
Test to Clear Value
test board UUCSS
release board UUCSS
add ds1 UUCSS
test board UUCSS l r 2
test board UUCSS l r 2
reset board UUCSS
test board UUCSS l r 2
test board UUCSS l r 5
555-233-142