Avaya S8700 Maintenance Manual page 46

Maintenance Object Repair Procedure
Table 8-313. Test #146 Translation Update Test
Error Test
Code Result Description / Recommendation
ABORT Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
FAIL Internal system software error.
1. Verify the MAPD Interface circuit pack translation (display ds1 UUCSS).
PASS Translation data has been downloaded to the MAPD Interface circuit pack
successfully.
0 NO The test could not relate the internal ID to the port (no board). This could be
BOARD due to incorrect translations, no board is inserted, an incorrect board is
inserted, or an insane board is inserted.
1. Ensure that the board translations are correct. Execute the add ds1
2. If the board was already administered correctly, check the error log to
3. If the board was found to be correctly inserted in step 1, then issue the
4. Issue the reset board command.
5. Issue the release busy board command.
6. Issue the test board long command.
This should re-establish the linkage between the internal ID and the port.
8-742 Issue 1 May 2002
UUCSS command to administer the MAPD interface if it is not already
administered.
determine whether the board is hyperactive. If so, the board was shut
down. Reseating the board re-initializes it.
busyout board command.
Continued on next page
555-233-142