Avaya S8700 Maintenance Manual page 421

TDM-BUS (TDM Bus)
Error Log Entries and Test to Clear Values
Table 8-475. TDM Bus Error Log Entries
Error Aux
Type Data Associated Test
0 0 Any
1 0 Control Channel test (#296)
18(a) 0 busyout tdm PC
35(b) 0-1 TDM bus Corruption
257(c) 0 None
513(d) Any Idle Time Slot test (#294)
769(e) Any Idle Time Slot test (#294)
769(f) Any Idle Time Slot test (#294)
1025(g) Any None
3872(h) Any None
3873(h) Any None
3874(h) Any None
3877(h) Any None
Notes:
a. The TDM bus has been busied out by the technician. The error will retire
when the technician releases the TDM bus.
b. This error indicates the TDM bus is corrupted. If the corruption was on the
Control Channel bus, TDM bus maintenance will automatically switch the
control channel and/or tones to the other bus. The same strategy applies if
the corruption was on the bus carrying the tones.
An aux data value of 0 indicates the last reported TDM bus corruption was
on the Control channel bus.
An aux data value of 1 indicates the last reported TDM bus corruption was
on the Non-Control channel bus.
555-233-142
On/Off
Alarm Level Board
Any Any
MINOR ON
WARNING ON
MINOR ON
MAJOR ON
MINOR ON
WARNING ON
Issue 1 May 2002
Test to Clear
Value
test tdm P
test tdm P r 3
release tdm PC
set tdm PC
test tdm P r 3
test tdm P r 3
(see Notes)
8-1117