Avaya S8700 Maintenance Manual page 137

M/T-BD (Maintenance/Test Circuit Pack)
System Technician-Demanded Tests:
Descriptions and Error Codes
Always investigate tests in the order presented in the table below when inspecting
errors in the system. For example, by clearing error codes associated with the
Control Channel Loop-Around test (#52), you may also clear errors generated
from other tests in the testing sequence.
Order of Investigation
Control Channel Loop-Around test (#52)
NPE Audit test (#50)
1. D = Destructive, ND = Nondestructive
Repair procedures for the above tests are described in
Circuit Pack)'' on page
555-233-142
8-1374.
Short Test Long Test
Sequence Sequence
X X
X
''XXX-BD (Common Port
Issue 1 May 2002
1
D/ND
ND
ND
8-833