Avaya S8700 Maintenance Manual page 224

Maintenance Object Repair Procedure
Hardware Error Log Entries and Test to Clear
Value
Table 8-390. PKT-BUS Error Log Entries
Error Aux
Type Data Associated Test
2
0 0 Any
1 (a) 1–2 Packet circuit pack
Audit test (#570)
513 (b) 1–24 Maintenance/Test
Circuit Pack Query
test (#572)
1793 (c) Any None
2049 (d) 1–3 Maintenance/Test
Circuit Pack Query
test (#572)
2305 (e) 1–24 Maintenance/Test
Circuit Pack Query
test (#572)
3329 (f) 1–7 none
3585 (g) Any none
3841 (h) Any none
1. ON-BOARD indicates a problem with the packet bus itself.
2. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
Notes:
a. Within the last minute, packet circuit packs have reported errors that
indicate a possible packet bus failure. The Aux Data value is 1 or 2,
indicating that only one or more than one Packet circuit pack (respectively)
have reported a possible packet bus failure.
b. The Maintenance/Test packet bus port (M/T-PKT) for this port network has
determined that there are more packet bus faults than the port can correct.
The Aux Data value indicates the number of faulty leads.
c. Packet circuit packs have detected possible packet bus failures via in-line
error or via background test failure. Examine the Error and Alarm logs for
more specific PKT-BUS errors.
d. The Maintenance/Test packet bus port (M/T-PKT) has detected open leads
on the packet bus. The Aux Data value indicates the number of open
leads.
8-920 Issue 1 May 2002
Alarm On/Off
1
Level Board Test to Clear Value
Any Any test pkt port-network
MAJOR ON test pkt port-network P l r 2
MAJOR ON test pkt port-network P l r 2
MINOR ON test pkt port-network P l r 2
test pkt port-network P l
WARNING ON test pkt port-network P l
MINOR ON test pkt port-network P l
MINOR OFF
Continued on next page
555-233-142