ZyXEL Communications ENC User Manual page 96

Chapter 4 Configuration
Table 23 Configuration > MIB Browser (continued)
LABEL
Set
Clear
Name/OID
Value
96
DESCRIPTION
Click this to change the value of a managed object. The Set screen appears.
Figure 63 Set
The following describes the fields in the Set screen.
• Object ID: This field displays the selected MIB object's ID.
• Value: Enter a new value for the MIB object.
• Object Type: Select an appropriate type for the MIB object.
• Cancel: Click this to discard the changes and exit this screen.
• OK: Click this to save the changes and exit this screen.
Click this to remove the information displayed in the table.
This is the object's name or object ID.
This is the object ID's setting. For some objects you can set this. For other objects
you can only retrieve the setting.
ENC User's Guide