Login Page - ZyXEL Communications ENC User Manual

Table 145 Captive Portal: Add Authentication Policy
LABEL
SSID
Source Address
Destination
Address
Schedule
Authentication
Force User
Authentication
OK
Cancel

8.7.9 Login Page

The login page appears whenever the captive portal intercepts network traffic, preventing
unauthorized users from gaining access to the network. Use this page to select the default login
page or customize it. Click Wireless Controller Management > Profile > Captive Portal
ENC User's Guide
DESCRIPTION
Select an SSID profile from the list.
Note: To use captive portal for wireless users that are connected to an SSID, you must set
the SSID's forwarding mode to Tunnel.
Select an address object from the list.
The source address is an IP address for which the captive portal intercepts all network
traffic.
Select an address object from the list.
The destination address is an IP address for which the captive portal intercepts all network
traffic toward.
Select a schedule from the list. If none are available, you can create one in Wireless
Controller Management > Profile > Captive Portal Profile > Schedule.
Select whether authentication is required or not necessary for this rule.
Select this option to redirect HTTP traffic to the login screen if the user has not logged in
yet.
Click OK to save your changes.
Click Cancel to exit this screen without saving your changes.
Chapter 8 Application
271