ZyXEL Communications ENC User Manual page 290

Chapter 8 Application
Figure 238 AAA Server: Add - RADIUS Server
The following table describes the labels in this screen.
Table 154 AAA Server: Add - RADIUS - Server
LABEL
Name
Description
Server Address
Authentication
Port
Backup Server
Address
Backup
Authentication
Port
Timeout
Key
290
DESCRIPTION
Enter a descriptive name (up to 30 alphanumerical characters) for identification purposes.
Enter the description of each server, if any. You can use up to 60 printable ASCII
characters.
Enter the address of the RADIUS server.
Specify the port number on the RADIUS server to which the NXC5200 sends
authentication requests. Enter a number between 1 and 65535.
If the RADIUS server has a backup server, enter its address here.
Specify the port number on the RADIUS server to which the NXC5200 sends
authentication requests. Enter a number between 1 and 65535.
Specify the timeout period (between 1 and 300 seconds) before the NXC5200 disconnects
from the RADIUS server. In this case, user authentication fails.
Search timeout occurs when either the user information is not in the RADIUS server or the
RADIUS server is down.
Enter a password (up to 15 alphanumeric characters) as the key to be shared between the
external authentication server and the NXC5200.
The key is not sent over the network. This key must be the same on the external
authentication server and the NXC5200.
ENC User's Guide