Table of Contents
Advertisement
5.2.1 Edit Event Configuration
To modify an event's setting, select an event and click Edit in the Events > Event Configuration.
Figure 87 Event Configuration > Default > Edit
The following table describes the labels in this screen.
Table 44 Event Configuration > Default > Edit
LABEL
Event Name
Category
Trap OID
Severity
Message
Action
Clear Correlated Events
Clear correlated
events
Available Events
ENC User's Guide
DESCRIPTION
This field displays the name of the selected event.
This field displays the category to which the event belongs.
This field displays the object identifier (OID) of the event. An OID identifies a trap (an
event).
Select the severity level for the event you want to display in the ENC. The choices and
the severity level from low to high are Info, Warning, Minor, Major, and Critical.
Type the information you wish to display for the event in the ENC. You can use the
variables defined on the right hand of the screen. For example, use "$2" to display the
device name that generates this event.
Select the action profile to apply to this event. The ENC takes the action when it
receives this event. Select None to not apply this event any action.
Select this to have the ENC automatically acknowledge any selected correlated events.
This field displays all available correlated events that you can select. Select one or more
events (select while pressing [Ctrl]) and press the right arrow button (>) to add them
into the selected list at the right field. Use the double right arrow button (>>) to add all
available events to the right field.
Chapter 5 Event
127
Advertisement
Table of Contents
