ZyXEL Communications ENC User Manual page 234

Chapter 8 Application
Table 113 AP Manager > AP Configuration (continued)
LABEL
check box
Status
Name
IP Address
MAC Address
AP Profile
Configuration
Status
Device Model
8.5.3.1 The Edit AP Profile Screen
Use this screen to search and check the basic settings such as IP address, MAC address and AP
profile for a wireless AP. To open this screen, select a device and click Edit AP Profile in the
Application > AP Manager > AP Configuration screen.
Figure 184 AP Manager > AP Configuration > Edit AP Profile
The following table describes the labels in this screen.
Table 114 AP Manager > AP Configuration > Edit AP Profile
LABEL
AP Profile
Schedule Time
234
DESCRIPTION
Select the check box of an entry and click Access Web GUI or Edit AP Profile to take
the action for the entry respectively. Select or clear the check box at the table heading line
to select or clear all check boxes in this column.
This field displays the status of a matched wireless AP.
This field displays the AP's display name.
This field displays the AP's IP address.
This field displays the AP's MAC address.
This field displays the AP profile name the AP is using. N/A displays if you have not
applied any wireless AP profile to the AP.
This field displays the status of the applied AP profile to the AP. The possible values are:
• N/A - There is no AP profile being applied to the AP.
• Waiting - The AP profile has not yet been applied to the AP because the AP is
unavailable. If you selected Apply it when AP is available in the AP Manager > AP
Configuration > Edit AP Profile screen (see
the AP is available.
• Running - The ENC is applying the AP profile to the AP.
• Success - The AP profile has been successfully applied to the AP.
• Fail - The AP profile is failed to be applied to the AP because the AP is unavailable. If
you selected Apply Now in the AP Manager > AP Configuration > Edit AP Profile
screen (see Figure 184) but the AP was unavailable at that time, you see this status.
This field displays the AP's model name.
DESCRIPTION
Select an AP profile which you want to apply to the selected AP. You can create AP profiles
in the Application > AP Manager > AP Profile screen.
Select when to apply the AP profile to the device. Make sure the AP is available when you
click Apply Now. Otherwise, click Apply it when AP is available.
Figure 184), you see this status before
ENC User's Guide