ZyXEL Communications ENC User Manual page 328

Chapter 9 Maintenance
Table 181 Backup/Restore
LABEL
Port
User Name
Password
FTP path
The following fields are available if you select Storage Server as the backup location.
Network Folder
Authentication
User Name
Password
Apply
Database Backup/Restore
BackUp
Restore
Remove
Name
Time
Version
Note
Schedule BackUp
Enable Schedule
BackUp
Schedule Type
Time
Apply
328
DESCRIPTION
Enter a new port if your FTP server does not use port 21 for the service.
Enter the user name for your FTP account.
Enter the password for your FTP account.
Specify in which folder you want to store the backup file.
Type the full path of a folder on a storage server, to which you want to back up or
restore the configuration.
Select this if your server prompts for identification before allowing access.
Enter the user name for server login if authentication is required.
Enter the corresponding password for server login.
Click this to save the changes in this section.
Click this to add a backup file (a ZIP file containing a SQL file and other files such as
device firmware and configuration files) to the list. The file can be generated by
performing backup immediately or by uploading a backup file.
Select a backup file in the list and click this to restore the file to the ENC after you
double confirm the action.
If you want to restore a file that does not exist on the ENC, you have to upload the file
to the ENC first. You can upload a file through the Maintenance > Backup/Restore
> Backup screen (by selecting Upload BackUp File).
Select one or more backup files in the list and click this to remove the file from the
list.
This displays the name of an existing configuration file of the ENC. Click this name to
download the file to the computer where you are using to access the ENC.
This field displays the date and time of backup of the configuration file.
This displays the software version of the ENC when the configuration file was backed
up.
This displays additional information about the backup file.
Select this to have the ENC automatically perform system backup periodically.
Select Daily to perform backup once per day or Weekly to perform backup once per
week.
Select at which hour you want to perform daily backup. Select on which week day and
at which hour you want to perform weekly backup.
Note: This is based on the time zone setting of the ENC server, not your computer.
Click this to save the changes in this section.
ENC User's Guide